ADS Environmental Services Eureka Digital QR 775020 A0 - Manual (Page 34)

ADS Eureka Digital System User Manual
30
Delayed Recording Menu
This menu includes two options:
 Program
 Readback
Program
From this menu option, the user can set the transmitters to start recording
after a designated delay and for a specific time. This is useful when it is
not possible to maintain reception from the transmitters. To start
programming, the transmitters must be connected to the receiver via the y-
cable and turned off.
Note: When connecting the transmitters for programming, make
sure they are both turned off. The software turns them on
automatically as required.
Selecting the Program menu starts the Delayed Recording Wizard.
For the red and blue transmitters, a colored block(s) confirms detection of
the corresponding transmitter(s).
The user can designate the number of minutes before recording begins and
the number of minutes to record.
To initiate programming, click on the Next button. The Programmed
Transmitter Status window displays.