ADS Environmental Services Mikron QR 775014 A0 - Manual (Page 14)

ADS Mikron User Manual
11
Hand Probe with Ground Spike attached
Probe Handle
The probe handle consists of two rods, one with a handle at the end. The two
pieces screw together and into the top of the ground microphone or hand
probe. If necessary, the holes in the rods can be used during disassembly if
the rods are too tight to unscrew by hand.
Rods (three parts)
Three rods can be screwed into the base of the hand probe to create an
electronic listening stick.
Ground Contact Tripod
The tripod can be attached to the end of the hand probe for use as a base on
hard surfaces.
Ground Spike
The ground spike screws into the base of the hand probe to secure the unit in
soft ground.
Magnet Attachment
The magnet attachment allows the hand probe to be mounted onto a ferrous
surface.