ADS Environmental Services Mikron QR 775014 A0 - Manual (Page 18)

ADS Mikron User Manual
15
Each time the user presses the store button, the values move to the left and the
right-hand value clears (the left-hand stored value is lost). This allows the
user to compare the latest displayed value with the two previous values.
Volume Level
Holding down the Press-to-listen button shows a speaker symbol on the left
side of the display. Releasing the button crosses out the speaker symbol.
Sound volume display
A triangle graphic representing the volume of the sound in the headphones
displays below the speaker symbol. When the unit is on, the minimum
volume is set in the headphones. The user can change the volume using the
Decrease and Increase buttons. Changing the volume in the headphones does
not change the noise level displays.
Real-Time Noise Level
The unit displays a progress bar showing the current sound level detected in
the sensor. This is not the Minimum Noise Level.