ADS Environmental Services PrimeWorks QR 775018 A0 - Manual (Page 11)

ADS PrimeWorks User Manual
5
Installing PrimeWorks
Note: PrimeWorks uses the .NET framework. Therefore, it must
reside on the user’s PC before the PrimeWorks software can be
installed. If .NET does not already exist on the user’s PC, the
installation CD will initiate .NET installation automatically.
Note: The installation process provides the option to designate the
folders in which to install PrimeWorks. However, ADS recommends
using the designated default folders.
Install the PrimeWorks software in the following way:
Note: Do not run any other applications during the installation
procedure.
1. Insert the PrimeWorks installation CD into the CD-ROM drive. The
installation CD has an AutoPlay feature that should run the CD
automatically. However, if this does not occur, run the CD in one of the
following ways:
 Select Start > Run, enter [CD-ROM drive
designation]:\setup.exe, and then click OK.
 Navigate to the ADS Primework Setup.exe file on the CD through
My Computer or Windows Explorer, and then double-click on the
file.
2. Click Yes to initiate the installation process, or No to cancel.
3. Proceed through the installation wizard, supplying the appropriate
information as requested.
Note: If necessary, the .NET framework will be installed
automatically. Please allow several minutes for this to occur. The PC
may appear to be hung during installation. Once .NET installation is
complete, the user must repeat the PrimeWorks installation process.
4. Restart the computer upon request. This typically is required only after
.NET framework installation.