ADS Environmental Services PrimeWorks QR 775018 A0 - Manual (Page 55)

ADS PrimeWorks User Manual
49
Program Logger dialog
Once this connection is confirmed, click on the OK button to program the
logger with the current settings.
If the user attempts to program the logger before all the data is read back from
the logger, PrimeWorks will display a warning.
Readback Error dialog
Clicking on the Yes button will program the logger without reading back some
of the logged data stored in the logger. This data will be lost. Clicking on the
No button will discontinue logger programming.
Logger Clock
The Logger Clock section on the Logger Information tab enables the user to
configure the software to check the logger clock and synchronize it to the user’s
PC clock when necessary or based on a user-defined difference.
Logger Clock section on Logger Information
A warning displays when the software detects a time difference between the PC
and the logger clocks.
Channel Parameters
Selecting the Channel Information tab displays the channel data.