Description of features – Amico Hydraulic Patient Transfer Stretcher (S-H-300) User Manual
Page 13
Permanent Telescopic IV Pole
The permanent IV pole is available as an option on the S-H-300 stretcher.
WARNING:
Do not exceed the load capacity of the IV pole. If the IV pole is overloaded,
personal injury or equipment damage may occur.
The safe working load of the pole is 25 lbs.
To Raise the permanent IV pole:
a. Grasp the stored IV pole and raise it from its stored position. Make sure it is secure in its support bracket, with
the sleeve over the support bracket.
b. Grasp the top section of the IV pole, and raise it until the desired height is reached. Screw back knob to hold
the IV pole in position.
To lower the permanent IV pole:
a. Unscrew the knob to release the IV pole.
b. Manually lower the top section of the pole until it fully collapses.
c. Screw back knob to hold the IV pole in position.
Description of Features
www.amico.com
13