Description of symbols – Amico Hydraulic Patient Transfer Stretcher (S-H-300) User Manual

Page 5

Advertising
background image

Symbol

Description

Type B applied part according to IEC 60601-1 (UL 60601-1).

According to IEC 60529, rating for protection against fluid ingress and identified as equipment that is

protected against spraying and splashing water.

Ordinary equipment not rated for fluid ingress per IEC60529. This applies to exam light control box ONLY.

CAUTION: Consult accompanying documents.

Medical electrical equipment classified by Underwriters Laboratories inc. with respect to electric shock,

fire and mechanical hazards only in accordance with UL60601-1, CAN/CSA C22.2 No. 601.1, IEC60601-1-2-

38, and IE60601-2-46.

CPR control - activates the CPR function.

Stretcher down control - Shows which way the stretcher will move when the pedal is pressed.

Stretcher up control - Shows which way the stretcher will move when the pedal is pressed.

Trendelenburg control - Puts the stretcher in the trendelenburg position.

Reverse Trendelenburg control - Puts the stretcher in the reverse trendelenburg position.

Siderail latch release - To lower the siderail.

Push handle release - To lower the push handle to the stored position.

Keep hands clean.

Safe Working Load - Shows the safe working load of the stretcher.

CAUTION: Do not sit on Foot section of stretcher while Knee section is raised.

Description of Symbols

www.amico.com

5

Advertising