Amico Hydraulic Patient Transfer Stretcher (S-H-300) - Manual (Page 9)

Mattresses
WARNING: Only mattresses that meet Amico specifications and recommendations should be used. Failure to do
so could reduce the effectiveness of the safety features and systems incorporated into the stretcher. Personal injury or
equipment damage could occur.
Push Handles
The push handles located at the head and foot ends of the stretcher are used to
move the stretcher.
Lift up the push handle and rotate it into the push position. The handle should
automatically lock into place.
Lower the push handle by pulling up on the locking pin and rotating it to the
stored position.
Brake/Neutral
The Brake/Steer pedals are located at both the head and foot of the S-H-300
and it is equipped with a central brake system.
WARNING:
Unless transporting the patient, always set the brakes when the stretcher is
occupied. Reconfirm that the brakes are set before any patient transfer. Failure
to do so may result in injury or equipment damage.
To set the brakes, press one of the back brake pedals. All four casters, will lock.
To release the brakes, press the pedal in the neutral position.
Steering System
The Steering System is optional on the S-H-300 stretcher. The steer function is
used to keep the stretcher moving in a straight line and to make it easier to turn
corners.
Description of Features
www.amico.com 9