Amico Light-Duty Monitor Arm User Manual
Page 10
Advertising
10
Amico Accessories Inc.
SECTION 3: Installation on Mounting Platform
Mounting on the Desk: Clamp Mount Assembly
Mounting on the Desk: Over Existing Grommet
4. Loosen the collar and adjust the height as desired before installing and tightening the Light Monitor Arm.
Base Plate
Grommet Plate
1. Remove six screws from the existing plate.
2. Secure the grommet plate to the base plate with four screws as shown below.
pressure plate
2.5 mm HEX key
Advertising