Amico Light-Duty Monitor Arm - Manual (Page 11)

www.amico.com 11
3. Remove the screw from the gripping plate as shown below.
4. Insert the gripping plate into bolt and tighten into base plate as shown below.
5. Unscrew the pressure plate and bolt from the base and sandwich desktop surface as shown. Turn and tighten by
hand to ensure that the grommet clamp pressure plate fully contacts the desktop surface and is secure.
6. Refer to “Mounting on the Desk: Clamp Mount Assembly” step 4 on page 10 for collar adjustment and Light
Monitor Arm installation
SECTION 3: Installation on Mounting Platform
Base Plate
Gripping Plate
pressure plate pressure plate
Mounting on the Desk: Over Existing Grommet