Amico Light-Duty Monitor Arm - Manual (Page 9)

www.amico.com 9
1. Adjust the height of the desk clamp to suit desktop surface.
2. Place the plastic gasket cushion as shown.
3. Place the desk clamp on top of the desk in the desired position and ensure the clamp opening is facing towards
the edge of the desktop. Turn the handle to tighten by hand to ensure that the desk clamp fully contacts the
desktop surface and is secure.
SECTION 3: Installation on Mounting Platform
Mounting on the Desk: Clamp Mount Assembly
For Use With: LMA-__-DSK-L-__/LMA-__-DSK-S-__
WARNING It is recommended that the desk clamp be clamped to the side or rear of desktop surface. This
assembly is suitable for square edged desks only. It is the user’s responsibility to make sure the desk structure to
which this clamp is attached can support the combined weight of all components.
0.39'' - 2.95''
(9.9 mm - 75 mm)
pressure plate pressure plate