Amico Mira LED - Manual (Page 11)

www.amico.com 11
Installation: Mira LED Ceiling Mount
Load data
Bending moment M
B
200 Nm
Vertical weight forces FG 130 N
Installing ceiling mount
WARNING
To be fitted only by qualified personnel
• Installation may be carried out by a state certified
fitter. Insufficient professional knowledge could
cause life-threatening injury.
WARNING
Danger from falling light.
• The ceiling must be solid concrete to ensure a
secure mount.
WARNING
Danger of death from electric shock.
• All-pole disconnection of the light from the
mains by an external switch must be possible.
• Loosen the mounting screw from the receptacle.
• Using long-nose pliers, pull the receptacle with
cable completely out of the ceiling tube at the
inner ring.
• Cut the ceiling tube to the required length at the
upper end using a metal saw and de-burr the cut
end.
• Remove the mounting screw.
• Insert the ceiling tube 1 into the ceiling mounting
2 and drill with an Ø 9 mm bit 3. Use the existing
bore of the ceiling mounting as a guide.
• Push the cable with receptacle into the ceiling
tube again.
• Align the threaded bore in the receptacle exactly
with the existing bore in the ceiling tube. Fix with
the mounting screw.
• Mark 4 drilling points.
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2
ENG INSTALLING triango 30 C; Installing ceiling mount
10
5 INSTALLING triango 30 C
5.1 Load data
Bending moment M
B
200 Nm
Vertical weight forces F
G
130 N
5.2 Installing ceiling mount
WARNING
To be fitted only by qualified personnel
 Installation may be carried out by a state-
certified fitter. Insufficient professional
knowledge could cause life-threatening
injury.
WARNING
Danger from falling light.
 The ceiling must be solid concrete to
ensure a secure mount.
WARNING
Danger of death from electric shock.
 All-pole disconnection of the light from the
mains by an external switch must be
possible.
 Loosen the mounting screw from the
receptacle.
 Using long-nose pliers, pull the receptacle
with cable completely out of the ceiling tube
at the inner ring.
 Cut the ceiling tube to the required length at
the upper end using a metal saw and deburr
the cut end.
 Remove the mounting screw.
 Insert the ceiling tube 1 into the ceiling
mounting 2 and drill with an Ø 9 mm bit 3.
Use the existing bore of the ceiling mounting
as a guide.
 Push the cable with receptacle into the
ceiling tube again.
 Align the threaded bore in the receptacle
exactly with the existing bore in the ceiling
tube. Fix with the mounting screw.
 Mark 4 drilling points.
3
1
2