Installation: mira led ceiling mount, Caution, Notice – Amico Mira LED User Manual
Page 12: Warning
12
Amico Lighting Solutions
Installation: Mira LED Ceiling Mount
• Check clearances.
CAUTION
Risk of injury from the falling luminaire.
• The ceiling mounting must be fixed with the
mounting material corresponding to the material
of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
• Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
• Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
• The ceiling must be solid concrete to ensure a
secure mount.
• Use appropriate wall anchors.
• Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a hammer.
• Tighten the nuts (observing the torque specified
by the ceiling anchor manufacturer).
• Pull the lamp cable from the ceiling tube through
the mounting.
• Insert the ceiling tube into the mounting.
• Secure with the mounting screw M8 1
• Tighten M8 locking screw and nut 1
• Also tighten the 4 Allen screws in the mounting 2
WARNING
Danger of death from electric shock.
• Switch off circuit breaker before working on the
mains connection.
INSTALLING triango 30 C; Installing ceiling mount
ENG
11
Check clearances.
CAUTION
Risk of injury from the falling luminaire.
The ceiling mounting must be fixed with the
mounting material corresponding to the
Material of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
The ceiling must be solid concrete to
ensure a secure mount.
Use appropriate wall anchors.
Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a
hammer.
Tighten the nuts (observing the torque
specified
by
the
ceiling
anchor
manufacturer).
Pull the lamp cable from the ceiling tube
through the mounting.
Insert the ceiling tube into the mounting.
Secure with the mounting screw M8 1
Tighten M8 locking screw and nut 1
Also tighten the 4 Allen screws in the
mounting 2
WARNING
Danger of death from electric shock.
Switch off circuit breaker before working on
the mains connection.
Connect to the main power supply.
Connect the lamp cable.
Slide cover and ring over ceiling mount and
screw in place.
1
1
2
240
170
L1
N
INSTALLING triango 30 C; Installing ceiling mount
ENG
11
Check clearances.
CAUTION
Risk of injury from the falling luminaire.
The ceiling mounting must be fixed with the
mounting material corresponding to the
Material of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
The ceiling must be solid concrete to
ensure a secure mount.
Use appropriate wall anchors.
Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a
hammer.
Tighten the nuts (observing the torque
specified
by
the
ceiling
anchor
manufacturer).
Pull the lamp cable from the ceiling tube
through the mounting.
Insert the ceiling tube into the mounting.
Secure with the mounting screw M8 1
Tighten M8 locking screw and nut 1
Also tighten the 4 Allen screws in the
mounting 2
WARNING
Danger of death from electric shock.
Switch off circuit breaker before working on
the mains connection.
Connect to the main power supply.
Connect the lamp cable.
Slide cover and ring over ceiling mount and
screw in place.
1
1
2
240
170
L1
N
INSTALLING triango 30 C; Installing ceiling mount
ENG
11
Check clearances.
CAUTION
Risk of injury from the falling luminaire.
The ceiling mounting must be fixed with the
mounting material corresponding to the
Material of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
The ceiling must be solid concrete to
ensure a secure mount.
Use appropriate wall anchors.
Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a
hammer.
Tighten the nuts (observing the torque
specified
by
the
ceiling
anchor
manufacturer).
Pull the lamp cable from the ceiling tube
through the mounting.
Insert the ceiling tube into the mounting.
Secure with the mounting screw M8 1
Tighten M8 locking screw and nut 1
Also tighten the 4 Allen screws in the
mounting 2
WARNING
Danger of death from electric shock.
Switch off circuit breaker before working on
the mains connection.
Connect to the main power supply.
Connect the lamp cable.
Slide cover and ring over ceiling mount and
screw in place.
1
1
2
240
170
L1
N
INSTALLING triango 30 C; Installing ceiling mount
ENG
11
Check clearances.
CAUTION
Risk of injury from the falling luminaire.
The ceiling mounting must be fixed with the
mounting material corresponding to the
Material of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
The ceiling must be solid concrete to
ensure a secure mount.
Use appropriate wall anchors.
Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a
hammer.
Tighten the nuts (observing the torque
specified
by
the
ceiling
anchor
manufacturer).
Pull the lamp cable from the ceiling tube
through the mounting.
Insert the ceiling tube into the mounting.
Secure with the mounting screw M8 1
Tighten M8 locking screw and nut 1
Also tighten the 4 Allen screws in the
mounting 2
WARNING
Danger of death from electric shock.
Switch off circuit breaker before working on
the mains connection.
Connect to the main power supply.
Connect the lamp cable.
Slide cover and ring over ceiling mount and
screw in place.
1
1
2
240
170
L1
N
INSTALLING triango 30 C; Installing ceiling mount
ENG
11
Check clearances.
CAUTION
Risk of injury from the falling luminaire.
The ceiling mounting must be fixed with the
mounting material corresponding to the
Material of the ceiling.
CAUTION
Risk of injury from the falling luminaire.
Two people are required for the installation.
NOTICE
Use safety equipment recommended by tool
manufacturer.
Drill holes and blow out with blower.
CAUTION
Risk of injury from the falling luminaire.
The ceiling must be solid concrete to
ensure a secure mount.
Use appropriate wall anchors.
Hold ceiling mounting against the ceiling and
knock in the masonry anchors using a
hammer.
Tighten the nuts (observing the torque
specified
by
the
ceiling
anchor
manufacturer).
Pull the lamp cable from the ceiling tube
through the mounting.
Insert the ceiling tube into the mounting.
Secure with the mounting screw M8 1
Tighten M8 locking screw and nut 1
Also tighten the 4 Allen screws in the
mounting 2
WARNING
Danger of death from electric shock.
Switch off circuit breaker before working on
the mains connection.
Connect to the main power supply.
Connect the lamp cable.
Slide cover and ring over ceiling mount and
screw in place.
1
1
2
240
170
L1
N