320d – Aphex 320D Compellor User Manual
Page 13
320D
Compellor
Page 12
Page 13
The output impedance of 65 ohms is optimized for driving long cables and consequently
a Compellor can drive just about any kind of line, balanced or unbalanced, of any length.
Unique servo balanced output circuitry automatically maintains the proper gain and level into
a balanced or unbalanced output line.
Output connections are made by means of 3-pin male XLR jacks. The pinout follows the
same conventions as the input jacks described above, and you should exercise the same
care about wiring as described for input wiring. Refer to Appendix 1 for complete details
about wiring and interfacing to other equipment.
4.13.2 Digital
The AES/EBU output conforms to the 110 ohm standard using a 3-pin XLR male jack. It is
capable of driving any standard digital audio cable run. Be sure to use only digital audio rated
cabling for best results.
4.14 Summary
If you pay attention to the line voltage setting, reference level, and i/o wiring you should have
no trouble operating the Compellor. If any difficulties are experienced while installing the
Compellor, other information contained in this manual will probably supply adequate assis-
tance. Please study this manual before contacting the factory for assistance.