Apricorn Aegis Padlock DT - USB 3.0 Desktop Drive - Manual (Page 11)

www.apricorn.com 11
Adding a new User Password
You can add a new User Password by doing the following:
1.
Enter the Admin Mode (refer to page 9 for details).
2.
Press and hold + 1 until the ADMIN (A) indicator light flashes BLUE intermittently.
3.
Enter a User Password and press (a minimum of 6 digits and a maximum
of 16 digits). The UNLOCK indicator light will flash GREEN three times.
4.
Immediately re-enter the new User Password and press . If the UNLOCK
indicator light goes GREEN for two seconds and then the ADMIN (A) indicator
light goes to solid BLUE, the User Password was added successfully.
Deleting the User Passwords
You can delete all User Passwords by doing the following:
1.
Enter the Admin Mode (refer to page 9 for details).
2.
Press and hold 7 + 8 + for five seconds until the ADMIN (A) indicator light
flashes BLUE intermittently. After the UNLOCK indicator light will flash GREEN
three times and then the ADMIN (A) indicator light will flash BLUE intermittently.
3.
Press and hold 7 + 8 + a second time for five seconds until the UNLOCK
indicator light goes solid GREEN for two seconds. Then the ADMIN (A)
indicator light will go back to solid BLUE. This indicates that the User
Passwords were deleted successfully.
Changing the User Password
You can change the User Password by doing the following:
1. Enter User Mode (refer to page 8 for details).
2.
Press and hold + 1 until the LOCK indicator light flashes RED.
3. Enter your old password and press . The UNLOCK indicator light will turn
GREEN, then the ADMIN (A) indicator light will change to flashing BLUE.
4.
Enter the new password and press (The Password must be a minimum
of 6 digits and a maximum of 16 digits). The UNLOCK indicator light will flash
GREEN three times.
5.
Immediately re-enter the new User Password and press . The UNLOCK
indicator light will stay solid GREEN indicating that the User Password has
been changed successfully.