Apricorn Aegis Padlock DT - USB 3.0 Desktop Drive - Manual (Page 6)

www.apricorn.com 6
Aegis Padlock DT - Getting Started
Before you begin
Be sure to review the following information before you begin to use the Aegis
Padlock DT.
Attention: Use only the included cables with your Aegis Padlock DT. You
might damage the drive if you use a cable not included with the Aegis
Padlock DT.
Connecting the Aegis Padlock DT
1. Ensure that the power switch on the back of the Aegis Padlock DT is in the OFF
position.
2. Connect the Aegis Padlock DT to a power outlet using the included AC Adapter.
3. Attach the USB cable to the Aegis Padlock DT drive and to an available USB port
on your computer.
4. Turn the power switch on the back of the Aegis Padlock DT to the ON position.
5. The LOCK indicator light should turn RED, indicating that the drive is now ready
to use.
O
|
On Off