Setting the unattended auto lock feature – Apricorn Aegis Padlock DT - USB 3.0 Desktop Drive User Manual

Page 12

Advertising
background image

www.apricorn.com

12

Setting the Unattended Auto Lock Feature

To protect against unauthorized access if the drive is unlocked and unattended, the

Aegis Padlock DT can be set to automatically lock after a pre-set amount of time.
In its default state, the Aegis Padlock Unattended Auto Lock feature is turned off.
The Unattended Auto Lock can be set to activate after 5, 10 or 20 minutes.

To set the Unattended Auto Lock please use the following steps:

1.

Enter the Admin mode by pressing and holding + 0 for five seconds until

the LOCK indicator light flashes RED. This indicates that you can enter the

Admin Password.

2.

Enter the Admin Password and press . The drive is in Admin Mode when the
ADMIN (A) indicator light has changed to BLUE.

3.

Once in Admin mode, press + 6. The LOCK and ADMIN (A) indicator lights

should start flashing RED and BLUE intermittently.

4.

Press one of the numbers below that corresponds to amount of time you would

like the drive to lock after no activity:

5.

After you have input the number, the UNLOCK indicator light should flash

GREEN 3 times to indicate that you have successfully set the Unattended Auto
Lock feature.

Auto Lock Timeout Table:

1 = 5 min

2 = 10 min

3 = 20 min
0 = OFF

The default is 0 (OFF)

Advertising
This manual is related to the following products: