Apricorn Aegis Bio 3.0 - Solid State Drive - Manual (Page 6)

6
Aegis Bio - Connections
Before you begin
Be sure to review the following information before you begin to use the
Aegis Bio.
Attention: Use only the included cables with your Aegis Bio. You
might damage the drive if you use a cable not included with the
Aegis Bio.
The Aegis Bio is designed for portable use without an AC power adapter
and in most cases will be able to power on a single USB port. In the event
that the Aegis Bio is unable to power on a single USB connection, use the
included USB Y-cable.
Connecting the Aegis Bio
1. Attach the integrated USB cable of the Aegis Bio drive to an available USB
port on your computer, as shown below.
2. At least one of the Aegis Bio LEDs should turn on, indicating that the Aegis
Bio is receiving power.
If none of the LEDs
turns on, use the
included USB Y-cable.
Refer to directions on the
following page