B&G H2000 Pilot *DISCONTINUED* - Manual (Page 18)

Tank Level Sensing Processor and Sensors
Page 14
8.2.3 Overview
The software will support up to 10 incremental steps for calibrating the volume of your tank,
however for the examples below, six stages have been chosen: Empty, Full and four
intermediate levels. The readings from the sensor are then interpolated between these known
values to give an accurate representation of the quantities of liquid in the tanks at any given
point.
For example a tank which is triangular in section, may be calibrated as follows:
2
3
4
5
Triangular Tank
Section
1 (Empty)
6 (Full)