B&G Network Data - Manual (Page 5)

5
DEPTH DEPTH
ALARMS AND THE NETWORK DATA UNIT
The Network DATA unit can display the depth alarm
information that has been set on either Network DEPTH or
Network QUAD units. It is NOT able to change the alarm
values or enable/disable them. The Network DATA unit has
its' own internal alarm buzzer that will sound when an alarm
condition is met and transmitted over the entire Network
System. It is silenced by pressing any of the five keys, in the
lowest row, of any Network display unit.
The Network DATA unit can display the alarm value that has
been set or OFF if it is not enabled. The following are
examples of a depth alarm displays.
See USING THE DEPTH KEY for all the available alarm
displays.