B&G Network Data - Manual (Page 7)

7
DEPTH
DEPTH
USING THE DEPTH KEY
Press the DEPTH key to cycle through the depth options.
If there is no depth data the
Network DATA unit will display OFF
when the DEPTH key is pressed.
The depth information is only displayed when the Network
DATA unit is connected to a Network QUAD or Network
DEPTH unit. The depth units and the alarm values are set on
the main unit.
When depth data is available the following can be displayed:
• DEPTH M
Water depth in metres M, feet FT,
fathoms FA.
• DEP A M
Deep water alarm. The display will show
the value or OFF.
• SHA A M
Shallow water alarm. The display will
show the value or OFF.
• ANC A M
Anchor watch alarm. The display will
show the values alternatively or OFF.