B&G Network Data - Manual (Page 6)

6
SPEED
SPEED
USING THE SPEED KEY
Press the SPEED key to cycle through the speed options.
If there is no speed data the
Network DATA unit will display OFF
when the SPEED key is pressed.
The speed information is only displayed when the Network
DATA unit is connected to a Network QUAD or Network
SPEED unit. The units in which the speed and log information
is display is set on the main display unit.
When speed data is available the following can be displayed:
• SPEED KT
Boat speed in Knots KT or MPH MH.
• MX SP KT
Maximum boat speed since the last reset
of the trip log.
• AV SP KT
Average boat speed since the last reset
of the trip log.
• TRIP NM
The trip log value in Nautical Miles NM or
Statute Miles M.
• LOG NM
The stored log in Nautical Miles NM or
Statute Miles M.