Baseline Systems BaseStation 3200 - Manual (Page 6)

Baseline Ethernet Modem Connection Setup Guide
Rev. 8/25/08
www.baselinesystems.com ph: 866-294-5847 Page | 6
h. On the left, Click on “Serial Settings” under “Channel 1” Select 38400 for Baud Rate,
and then select “Yes” for both “With Passive Connect” entries, as shown below:
Once finished, scroll to the bottom of this page and click the “OK” button. If you forget
to do this before proceeding, your settings will need to be re-entered.
i. On the left, Click on “Connection” under “Channel 1”
Enter 6001 for the Local Port setting.