Baseline Systems BaseStation 6000 - Manual (Page 5)

5
10. In the Serial Number field (1) , type the serial number for the first RBU, and then press Enter. The system
searches for the device, and updates the Serial Number and Device Found fields.
Note: The RBU serial number is printed on a sticker that is located on the inside door panel of the RBU. The
serial number format is RBXXXXXXX (where the Xs represent a series of seven numbers).
11. We recommend that you type a description in the Description field (2) so you can easily identify the RBU
that you are working with.
12. Under the Active Zones column, in the Base field (3) , set the total number of zones that can run at one time
(concurrent zones) for that individual RBU to 1, which is the default value.
Note: We recommend that you initially set the number of active zones to 1 in order to test the quality of the
installation and to identify any potential problems with wiring, pipes, heads, and so on. See the Concurrent
Zone information at the end of this document. For help with concurrent zone settings, please call Baseline
Support at 1.866.294.5847.
13. Repeat Steps 6-12 for each RBU.
14. In the Total Active Zones field (4) , set the total number of zones that the entire system can run at one
time to 1.
15. In the Local Site Name field (5) , type the name of the site.
Baseline Inc.
Phone: 866.294.5847 · Fax: 208.323.1834 · www.baselinesystems.com