BE Pressure supply 6800 Watt Generator BE6800HER - Manual (Page 28)

28
NOTE: It is recommended to use ear protection when performing
operation, maintenance and repair of the generator.
Maintenance, replacement or repair of the emission control devices and
systems must be performed by an authorized Service Center or Dealer.
Daily Inspection
Before running the generator, check the following service items:
• Safe surroundings.
• Leakage of gasoline and engine oil.
• Clean engine oil.
• AC receptacle and DC terminal for damage.
• Enough gasoline.
• Excessive vibration, noise.
• Loose or broken bolts, nuts or shields.
• Clean air element.
Periodic Maintenance
Periodic maintenance is vital to safe and efficient operation of your
generator.
The emission control system consists of the following parts:
• Carburetor and internal parts
• Cold start enrichment system, if applicable
• Intake manifold, if applicable
• Air cleaner element
• Spark plug
• Magneto or electronic ignition system
• Spark advance / retard system, if applicable
• Exhaust manifold, if applicable
• Hoses, belts, connectors, and assemblies
Maintenance Schedule
maintenance
CAUTION
Make sure the engine is stopped before starting any maintenance,
servicing or repair.