Bio-Rad Image Lab™ Software - Manual (Page 35)

Configuring the Imager
User Guide | 35
13. Click Next to initialize the blue tray.
A progress indicator reports the
initialization of the tray.
When the tray has been initialized, the
next screen confirms that the tray has
been initialized.
14. Remove the blue tray from the
imager.
15. Click Next.
The wizard prompts you to initialize the
stain-free tray. If you do not have a
stain-free tray, click Skip and go to
Step
19 .
16. Make sure the stain-free tray is clean.
Then insert the tray into the imager and
close the door.
17. Click Next to initialize the stain-free
tray.
A progress indicator reports the
initialization of the tray.