Bio-Rad Bio-Plex Manager™ Software, Standard Edition - Manual (Page 10)

Appendix
Cable Connection Diagram
15
6. Exit the application and power off the array reader. Then power on
the array reader and restart the Bio-Plex Manager 4.1 software
application. The following two dialog boxes will appear in succession:
7. To restart the array reader, first exit from Bio-Plex Manager. Cycle
the power on the array reader and relaunch Bio-Plex Manager.
Congratulations—the Bio-Plex Manager 4.1 software installation is
complete!
NOTE: If the system settings were not set properly, follow the
instructions on any error message that appears. If problems are
encountered, contact your local Bio-Rad office, or in the US,
call 1-800-4BIORAD (1-800-424-6723).
14