Bio-Rad Bio-Plex Manager™ Software, Standard Edition - Manual (Page 4)

Materials Provided
The following items are provided with the selected kit.
3 2
Section 2
Requirements
Instrumentation
Identify the serial numbers of each of the array reader, microplate
platform, and HTF in order to determine whether they meet the minimum
requirements. Serial numbers can be interpreted as follows:
LX100 01 342 009
LX100
– Denotes the type of system
LX100 corresponds to the array reader (or analyzer)
LXY corresponds to the microplate platform (or XY platform)
LXSD corresponds to the HTF (or sheath delivery system)
01 – Refers to the year of manufacture (in this case 2001)
342 – Refers to the day of manufacture (in this case, the 342nd day of
the year)
009 – Refers to the instrument built that day (in this case, the 9th
instrument built that day)
Refer to the following chart to determine whether Bio-Plex Manager 4.1
software can be successfully installed on the current system.
Component Minimum Requirements (Serial Number)
Array Reader
(or Analyzer)
Array readers manufactured on or after October
1st (day 274) in the year 2000. For array
readers manufactured prior to this date, contact
your local Bio-Rad sales representative.
Microplate Platform
(or XY Platform)
Microplate platforms manufactured on or after
January 1st (day 001) in the year 2002. For
microplate platforms manufactured prior to this
date, contact your local Bio-Rad sales
representative.
HTF (or SDS) All upgradeable.
Catalog # Description
171SUPG30
Bio-Plex Manager 4.1 Standard Software for 3.0
Workstation, includes workstation license, validation
kit 4.0, MCV plate III, and communication cables to
upgrade Bio-Plex Manager 3.0 workstation
171SUPG40
Bio-Plex Manager 4.1 Software for 4.0
Workstation, includes communication cables to
upgrade Bio-Plex Manager 4.0 Standard or Security
workstation.
171STND23
Bio-Plex Manager 4.1 Standard Software for IS
2.3 System, includes workstation license, validation
kit 4.0, MCV plate III, calibration kit, communication
cables and calibration reminder sticker for systems
with IS 2.3 software