Canon VB-C500D - Manual (Page 50)

2-8
Step 2 Connect the Camera to the Network
Note
When turning off the power and then turning it back on, wait for at least 5
seconds before turning on the power. If the power is turned on too quickly, the
camera may not operate correctly. Also, when disconnecting/connecting the
power connection, be sure to observe the instructions provided in "Safety
Precautions/Notes on AC Adapter (Optional)" (
 P. xiv).
• The current may be limited for each port depending on the PoE HUB used.
However, the camera may not operate correctly when the current is limited. If
the camera malfunctions, do not limit the current.
• The total current consumption of ports may be limited depending on the PoE
HUB used. If multiple ports are used, the ports may not operate correctly.
Check the operation manual for the PoE HUB you are using.