Canon VB-C500D - Manual (Page 60)

2-18
Step 4 Install the Camera
4. Connect each interface cable.
• This process is not required if you don't use any microphone, sensor, AC adapter or
external power supply.
• Select an appropriate interface cable according to the external device used, and
connect the cable to the camera.
• The interface cables and camera have dedicated connectors and connection
terminals, respectively.
• You can select a desired direction from which to take out the interface cables and
other wirings.
Concealing the Wiring in a Ceiling
The cable cover has a cutout groove for guiding interface cables.
Cut out the groove, guide the cables through the cutout, and affix the cover to the camera
with screws.
Audio interface cable
I/O interface cable
Power interface
cable
Cut out the groove.