BlueAnt X3 Micro Bluetooth Headset - Manual (Page 10)

Using your headset
Phone Software
Please make sure you have the latest firmware upgrade for your Phone especially if you are
using a PDA Phone. Go to the support section of the manufacturers’ website to check you have
the latest version. Many new pda phones require a Bluetooth patch to improve Bluetooth
functionality from the original version.
Resetting Your Phone
As new phones become more like computers they become prone to software and memory
issues which may cause Bluetooth reconnection problems. This can be fixed simply by turning
the phone off and back on again. The phone will be reset and the working memory cleared.
Leaving your phone on continually for weeks at a time can cause this to happen so we
recommend you switch your phone off at least once a fortnight to avoid any problems.
lf you experience this problem regularly call your phone's manufacturer for a software upgrade
at a service center. You may be able to do this online. 17
18
To turn the flashing LED lights off (for night time driving)
1. Make sure the headset is on but not connected to any phone.
2. Short press the MFB button 5 times.
3. Repeat this process to turn the LED’s back on.
Setting up a Phone Profile (different to Bluetooth Profiles)
In your phone, set up a Profile with appropriate ringing volumes and keypad tones and activate
when using with the X3 micro. Some phones can automatically activate a desired profile when
connecting to a Car Kit or Headset Accessory. E.g. Go to Enhancement Settings and select a
Default Profile to activate when the headset connects. You can also personalize levels to make
suitable for yourself (see your phone’s user manual for instructions on using and activating
Phone Profiles). Typical phone Profiles are General, Outdoor, Meeting, Silent, Handsfree,
Headset, Portable handsfree and Carkit.