BlueAnt X3 Micro Bluetooth Headset - Manual (Page 22)

FAQ
4. How do I handle calls when the X3 micro is connected?
For incoming calls simply press the MFB
button (multi-function button) once to answer the call.
For outgoing calls press the MFB button once to activate voice dialing or dial as per normal from your
phone and the call will transfer to the X3 micro. For redialing the last number called, press volume for
3 seconds, To terminate an ongoing call press the MFB button once.
5. Can I transfer an ongoing call back to my phone to continue it there?
Yes, simply short press the MFB
and volume buttons together and the call will transfer back to the
phone. Or long press the MFB button, the headset will turn off and the call will continue on the phone.
6. How many devices can I pair to the X3 micro?
The X3 micro can store pairing information for 3 different phone devices and connect to either when
requested using Multi-Connect Call Switching Technology. With the headset on… press the MFB
once
to connect to the first paired phone, twice for the second and three times for the third. The X3 micro can
only connect to one phone at a time. To connect to the second or third phone the first must be
disconnected by short pressing MFB
and volume buttons.
7. Is my phone compatible?
If your phone has Bluetooth it more than likely supports a Handsfree or Headset Bluetooth profile, and so
will work with the X3 micro. Check your phones manual or our compatibility list on the Blueant website for
up to date information.
41
42
8. What is the passcode/passkey of the X3 micro?
The Passcode for the X3 micro is “1234”.
9. Can I change the passcode of the X3 micro?
No, the passkey is inbuilt and cannot be changed.
10. Can I use voice activated dialing if my phone supports it?
Yes the X3 micro supports voice activated dialing if your phone also supports it.
Check your phones user manual for information on setting this up.
11. Can I use the X3 micro to listen to music from my mobile?
Some mobiles can send music to the X3 micro using the Handsfree profile but it will be a mono
signal and sound a bit like an AM radio.
12. How often should I charge my X3 micro?
You should charge the X3 micro when the LED Indicator rapidly flashes Red twice every 5
seconds. The battery will last for about 180 hrs on standby and much longer if the X3 micro is
switched off in between uses.