Calyx FEMTI 125 / Triple Mode Amplifier - Manual (Page 11)

11
6. Guaranteed Specifications
OUTPUT POWER
STEREO : 125W/CH at 4 ohms
BRIDGE : 500W/CH at 4 ohms
FREQUENCY RESPONSE
20Hz~30kHz @ -0.25dB
THD+N
0.005% @ 10W
DYNAMIC RANGE
STEREO : 117dB
BRIDGE : 121dB
INPUT IMPEDANCE
47kΩ
INPUT SENSITIVITY
STEREO : 125W @ 1.3V
BRIDGE : 500W @ 1.3V
DAMPING FACTOR
>500
STANDBY POWER CONSUMPTION
10W
POWER REQUIREMENT
AC100~120V / AC210~230V, 50 or 60Hz (The voltage is fixed when factory out.)
FUSE TYPE
T6.3A 250(6.3A) slow-blow type 20 x 5mm Glass Tube
Maximum Dimensions:
Width : 220mm , Height : 61mm , Depth : 245mm
Mass:
3.9kg in Net
5kg in Gross
*Specifications and design subject to change without notice for improvements