Calyx FEMTI 125 / Triple Mode Amplifier - Manual (Page 9)

9
Right Speaker
M : Bi-Wiring Mode
Caution
Turn off the power to all components before making connections.
In this mode, the Calyx FEMTI Amplifier be used as a amplifier to operate bi-wiring speaker.
Connect your preamplifier using RCA cable.
Input connection is located on the rear left labeled ‘
’ or ‘L’
Select the Output Mode Selector switch located on the rear to ‘M’
After ensuring all connection, turn the Calyx FEMTI Amplifier power on and violet LED light will
turn on. After 5 seconds, the amplifier will stabilize and switch to normal operation mode.
Pre-amplifier
Calyx FEMTI Amplifier Calyx FEMTI Amplifier
Left Speaker