Calyx FEMTI 125 / Triple Mode Amplifier - Manual (Page 5)

5
2. Unpacking
Be sure to check the following items within the package.
1. Calyx FEMTI Amplifier Unit
2. Power Cord
3. Owner’s Manual
3. Preparation
● Calyx FEMTI Amplifier is set to 100~120V or 210V~230V depending on your local
requirement. If you want to change the voltage, please contact your Calyx audio retailer.
● Turn off the unit when selecting the output mode.
Calyx Femi Amplifier has three output modes. (Stereo mode, Mono mode, Bridged
mode).
● Unbalanced cable is sensitive to environmental noise and we recommend that you use
shorter length. Care must be taken when the Calyx FEMTI Amplifier is used in bridged
mono mode as its power is increased 4 times.
● The Calyx FEMTI Amplifier is designed to be very stable, but the unit may generate some
heat after a prolonged period of operation. Rest assure that is normal.
● Calyx FEMTI Amplifier’s speaker output is designed as balanced + and -. Care should be
taken not to touch the chassis or exposed speaker connectors of touching each other.
● On and Off sequence
Power On : Preamplifier on -> Calyx FEMTI Amplifier
Power Off : Calyx FEMTI Amplifer off -> Preamplifier off
● Do not remove the cover unless you are a certified technician.
● The Calyx FEMTI Amplifier is designed to exacting standard by applying highly technical
tuning and expert listening test. Your warranty will be void if you tune, modify or change
any part of the unit without prior consent from the manufacture.