Sony Trinitron KV-2199XDK - Manual (Page 11)

– 11 –
KV
-2199XDK
RM-952
9 Using Your New TV
Using Y
our New TV
1 Press SELECT until
“MANUAL PROGRAM”
appears.
2 Press + or –.
3 Press PROGR +/– or the
number buttons until the
desired program number
appears.
4 Press + or – until the
desired channel picture
appears.
5 Press SELECT.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal.
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate TV system until the picture or sound quality
is optimal.
SELECT
1
Presetting channels manually
1 2 3
4 5 6
7 8
0 -/--
9
PROGR
or
continued
B/G D/K
TV SYS: B/G
MANUAL PROGRAM
SELECT
VHF LOW B/G
10 Using Your New TV
AUTO PAL SECAM NTSC 3.58 NTSC 4.43
COL SYS : AUTO
To change the color system setting
If the color is abnormal when receiving programs through the
˘
(antenna) terminal or the … (video input) jack
(1) Press SELECT until “COL SYS” appears.
(2) Press + or – to select the appropriate color system until the color is optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
Skipping program numbers
1 Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2 Press SELECT until “MANUAL PROGRAM” appears.
3 Press + or –.
4 Press PIC MODE.
5 Press SELECT.
Presetting channels (continued)
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
¸ +/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1)
Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.