Sony Trinitron KV-2199XDK - Manual (Page 28)

– 41 –
KV-2199XDK
RM-952
5-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
Note:
•
All capacitors are in
µ
F unless otherwise noted.
•
All electrolytic capacitors are rated at 50V unless otherwise noted.
• All resistors are in ohms.
k
Ω
= 1000
Ω
, M
Ω
= 1000k
Ω
•
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
• : nonflammable resistor.
• ¢ : internal component.
•
: panel designation or adjustment for repair.
• All variable and adjustable resistors have characteristic curve B
unless otherwise noted.
•
Readings are taken with a color-bar signal input.
no mark
: PAL
( ) : SECAM
[ ] : NTSC 3.58
« » : NTSC 4.43
•
Readings are taken with a 10 M
Ω
digital multimeter.
•
Voltage are dc with respect to ground unless other-
wise noted.
•
Voltage variations may be noted due to normal pro-
duction tolerances.
•
All voltages are in V.
•
: Cannot be measured.
•
Circled numbers are waveform references.
•
: B + bus.
•
: B – bus.
•
: signal path.
Reference information
RESISTOR
: RN METAL FILM
: RC SOLID
: FPRD NONFLAMMABLE CARBON
: FUSE NONFLAMMABLE FUSIBLE
: RS NONFLAMMABLE METAL OXIDE
: RB NONFLAMMABLE CEMENT
: RW NONFLAMMABLE WIREWOUND
: * ADJUSTMENT RESISTOR
COIL : LF-8L MICRO INDUCTOR
CAPACITOR : TA TANTALUM
: PS STYROL
: PP POLYPROPYLENE
: PT MYLAR
: MPS METALIZED POLYESTER
: MPP METALIZED POLYPROPYLENE
: ALB BIPOLAR
: ALT HIGH TEMPERATURE
: ALR HIGH RIPPLE
Note: The component identified by shading and
mark ! are critical for safety. Replace only
with part number specified.
*