Cooper Instruments & Systems Dytran 5340 USB Triaxial Accelerometer - Manual (Page 10)

REV B 10/18/12, ECN 8972
10
Figure 9: Acquisition Window
8. Trigger Modes
Acquisition is started by enabling one of the two trigger modes. Auto Trigger mode is
amplitude independent so that triggering begins immediately and runs continuously when
enabled. i.e. similar to an oscilloscope auto triggered scroll mode.
Smart Trigger mode starts data acquisition when the first change in value on any of the three
acceleration axes exceeds the specified threshold in Units of Gpk‐pk. Acquisition is to be
stopped by user. Data are monitored continuously and the maximum change in value
(maximum of the three axes) is displayed in the
Cur Value field.
9. Inclination[deg] Display
Static inclination values in both X and Y axis, are updated continuously when the Auto or
Smart Trigger is enabled. These fields are only valid in static angle measurement mode.
10. Temperature Display
The temperature is measured and updated continuously when the Auto or Smart Trigger is
enabled.