Yealink RPS - Manual (Page 10)

Guide for User
6 | Yealink
4 Adding Servers
Before a device can be redirected to a specific configuration server, the server must be added to the RPS
by entering a name and a URL.
To add a configuration server to the RPS
1. On the summary page, click Add Server on the top shortcut-buttons, then Add Server dialog displays
as Figure 4.1:
(Additionally, you can click Add button on Servers list page to display Add Server dialog)
Figure 4.1
2. In the Name field, enter the name that must be less than 20 characters.
3. In the URL field, enter the exact server address that must be less than 255 characters
Note:
Four types of URL are supported: https/http/ftp/tftp
4. Click Save button to add the server to the RPS.
5. After adding server successfully, Servers page displays as Figure 4.2. The server you just added will
display in the top of the list.
Figure 4.2