Yealink RPS - Manual (Page 6)

Guide for User
2 | Yealink
2 Adding Devices
Through adding devices, a User can assign the Yealink devices to a specific configuration server
To add devices to a server
1. On the summary page, click Add Device on the top shortcut-buttons, then Add Device dialog displays
as Figure 2.1:
Figure 2.1
2. In the Enter MAC field, enter a valid MAC address and press <Enter>, the MAC address you entered
appears in the MAC List, in this way, you can add multiple MAC addresses one by one.
Notes:
○
1 Four types of valid MAC address formats are 001565000001, 00-15-65-00-00-01, 00 15 65 00 00 01,
00:15:65:00:00:00:01
○
2 ”Invalid MAC” notification means that the MAC address format is invalid.
○
3 Each MAC address can only be added one time by the same user. If you want to re-add the MAC
address, you should delete it and then add it.
④ If you enter a MAC that another RPS user has added, “Override current registration,continue?”
notification will pop up, you should check the MAC carefully before pressing “Yes” to override.
3. In the MAC List field, you can delete or clear the incorrect MAC addresses
4. In the Server field, you can select the server belonging to you.
Note:
The Server field can be None.
5. Click Save button to add these MAC addresses.
6. After adding devices successfully, Devices page displays as Figure 2.2, and the MAC addresses you just
added will display in the top of the list.