Yealink SIP-T19 User Manual
Page 84
User Guide for the SIP-T19P/SIP-T19 IP Phone
74
c.) If you select No Answer Forward:
1) Press or , or the Switch soft key to select Enable from the No
Answer field.
2) Enter the destination number you want to forward all unanswered incoming
calls to in the Forward to field.
3) Press or , or the Switch soft key to select the ring time to wait
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the idle screen indicates call forward is enabled.
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
To disable call forward in phone mode:
Do one of the following:
-
Press when the phone is idle.
-
Press Menu->Features->Call Forward.
Press or to select the desired forwarding type, then press the Enter soft
key.
Press or , or the Switch soft key to
select Disable to disable the call
forward.
Press the Save soft key to accept the change.
You can also enter the SIP URL or IP address in the Forward to field. For more information
on using the SIP URL or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.