Yealink SIP-T28P - Manual (Page 124)

User Guide for the SIP-T28P IP Phone
112
4. Press or , or the Switch soft key to select Record from the Key Type field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL record key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select URL Record from the Type field.
4. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Record and URL record keys are configurable via web user interface at the path
DSSKey.
The record and URL record keys control the recording, and are available:

During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call
The record and URL record keys are not available when:

There are no connected calls on your phone

You place a new call
To record a call: