Answering calls – Yealink SIP-T28P User Manual

Page 89

Advertising
background image

Basic Call Features

77

Press , , , or the Send soft key.

To place a call using the headset:

Do one of the following:

-

With the optional headset connected, press to activate the headset mode.

Press the line key to obtain a dial tone.

Enter the desired number using the keypad.

Press , , or the Send soft key.

-

With the optional headset connected, press to activate the headset mode.

Enter the desired number using the keypad.

Press , , or the Send soft key.

Note

To place multiple calls:

You can have more than one call on your SIP-T28P IP phone. To place a new call during
an active call, do one of the following:

-

Press the line key. The active call is placed on hold.

Enter the desired number using the keypad.

Press , , or the Send soft key.

-

Press or the Hold soft key to place the original call on hold.

Press the New Call soft key.

Enter the desired number using the keypad.

Press , , or the Send soft key.

You can press or to switch between the calls, and then press the Resume soft
key to retrieve the desired call.

When you are not in another call, you can answer a call in three ways:

Using the handset

Using the speakerphone

To permanently activate the headset mode, refer to

Headset Prior

on page

53

.

Advertising