Yealink VP530 - Manual (Page 61)

Customizing Your Phone
49
code area. For example, area code is configured as "Code: 011, Min Length: 4, Max
Length: 11", then when you dial out the number "56789", the phone will add the area
code and dial out the number "01156789".
To configure the area code and lengths via web user interface:
1. Click on Phone->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to accept the change.
Note
You can block the dialing of specific numbers. When you dial a block out number on
your phone, the dialing will fail and the LCD screen will prompt "Forbidden Number".
You can configure 10 block out numbers for the phone.
To add a block out number via web user interface:
1. Click on Phone->Dial Plan->Block Out.
2. Enter the desired value in the Block Out Number field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to add the block out numbers.
You can enable the live dialpad feature on the VP530 IP video phone, which enables the
IP video phone to automatically dial out the phone number without pressing any other
key. You can also configure a period of time before automatically dialing out the phone
number.
To enable the live dialpad via web user interface:
1. Click on Phone->Features.
2. Select Enable from the pull-down list of Live Dialpad.
3. Enter the desired delay time (1~14s) in the Inter Digit Time (1~14) (seconds) field.
4. Click Confirm to accept the change.
Note The default delay time of the live dialpad feature is 4s.
You can configure the live dialpad via web user interface only.
The default values of the minimum and maximum length are 1 and 15 respectively.