John Deere stx38 - Manual (Page 26)

2 - 18
3/20/97
HYDROSTATIC TRANSMISSION OIL SPECIFICATIONS AND INFORMATION
HYDROSTATIC TRANSMISSION OIL
HYDROSTATIC TRANSMISSION OIL
- NORTH AMERICA
Use the following oil viscosity based on the air
temperature range. Operating outside of the
recommended oil air temperature range may cause
premature hydrostatic transmission failure.
IMPORTANT: ONLY use a quality SAE 10W-30
engine oil in this transmission. DO NOT mix any
other oils in this transmission. DO NOT use
BIO–HY–GARD® in this transmission.
The following John Deere oils are PREFERRED:
• TURF-GARD®—SAE 10W-30;
• PLUS-4®—SAE 10W-30.
Other oils may be used if above recommended John
Deere oils are not available, provided they meet one of
the following specifications:
• API Service Classification SG or higher.
John Deere Dealers: You may want to cross-
reference the following publications to recommend the
proper oil for your customers:
• Module DX,ENOIL2 in JDS–G135;
• Section 530, Lubricants & Hydraulics, of the John
Deere Merchandise Sales Guide;
• Lubrication Sales Manual PI7032.
M58275
SAE 10W-30
AIR TEMPERATURE