HP laserjet m1212nf User Manual

Page 218

Advertising
background image

Control panel message

Description

Recommended action

54.1C Error

Turn off then on

The product has experienced an internal
hardware error.

Turn off the power by using the power
switch, wait at least 30 seconds, and then
turn on the power and wait for the product to
initialize.

If a surge protector is being used, remove it.
Plug the product directly into the wall socket.
Use the power switch to turn the product on.

If the error persists, contact HP. See

www.hp.com/support/ljm1210series

or the

support flyer that came in the product box.

Comm. error

The product experienced a communication
error while attempting to send or receive a
fax.

Verify that the fax phone line is working
correctly.

Try sending or receiving the fax again.

If the error persists, contact HP. See

www.hp.com/support/ljm1210series

or the

support flyer that came in the product box.

Device error

Press [OK]

The product experienced an internal
communication error.

This is a warning message only. Job output
might be affected.

Door open

The cover above the print cartridge is open.

Close the cover.

Engine comm. Error

The product has experienced an internal
hardware error.

1.

Turn off the power by using the power
switch, and then wait at least 30
seconds.

2.

If a surge protector is being used,
remove it. Plug the product directly into
the wall socket.

3.

Turn on the power and wait for the
product to initialize.

If the error persists, contact HP. See

www.hp.com/support/ljm1210series

or the

support flyer that came in the product box.

Fax recv. error

The product was unable to receive an
incoming fax.

Verify that the fax phone line is working
correctly.

Ask the person who sent the fax to send it
again.

If the error persists, contact HP. See

www.hp.com/support/ljm1210series

or the

support flyer that came in the product box.

Fax Send error

The product was unable to send the fax.

Try sending the fax later, or confirm with the
recipient that the receiving fax machine is
ready.

If the error persists, contact HP. See

www.hp.com/support/ljm1210series

or the

support flyer that came in the product box.

204

Chapter 12 Solve problems

ENWW

Advertising