HP laserjet m1212nf User Manual
Page 91
NOTE:
The product must be connected to a wired or wireless network. To use HP Cloud Print, you
must first have access to the Internet and enable HP Web Services.
1.
Enable HP Web Services from the product control panel by following these steps:
a. At the Home screen on the product control panel, press the
button.
b. Use the arrow buttons to scroll to the HP Web Services menu, and then press the
OK
button.
c.
Use the arrow buttons to scroll to the Enable Web Services option, and then press the
OK
button. An information page prints.
2.
For advanced configuration options, enable HP Web Services in the HP Embedded Web Server
(EWS) by following these steps:
a. After the product is connected to the network, print a configuration page and identify the
product IP address.
b. At your computer, open a Web browser and enter the product IP address into the address
line. The HP EWS appears.
c.
Click the HP Web Services tab. If your network does not use a proxy server to access the
Internet, proceed to the next step. If your network uses a proxy server to access the Internet,
follow these instructions before proceeding to the next step:
i.
Select the Proxy Settings tab.
ii. Select the Check this box if your network uses a proxy server to access
the Internet check box.
iii. In the Proxy Server field, enter the proxy server address and port number, and then
click the Apply button.
d. Select the HP Web Services tab and click the Enable button. The product configures the
connection to the Internet, and then a message appears informing you that an information
sheet will be printed.
e. Click the OK button. An information page prints out. On the information page, look for the e-
mail address that is automatically assigned to the product.
3.
To print a document, attach it to an e-mail message, and then send the message to the product's e-
mail address. Go to
www.hpeprintcenter.com
for a list of supported document types
4.
Optionally, use the HP ePrintCenter Web site to define security settings and to configure default
print settings for all HP ePrint jobs sent to this product:
a. Open a Web browser and go to
www.hpeprintcenter.com
.
b. Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.
ENWW
Print with Windows
77