Canon EOS 50D - Manual (Page 145)

145
You can adjust the brightness of the LCD monitor to make it easier to
read.
1
Select [LCD brightness].
Under the [6] tab, select [LCD
brightness], then press <0>.
2
Adjust the brightness.
While referring to the gray chart, turn
the <5> dial, then press <0>.
You can also display the [LCD
brightness] screen with the <B>
button.
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
1
Select [Review time].
Under the [1] tab, select [Review
time], then press <0>.
2
Set the desired time.
Turn the <5> dial to select the
setting, then press <0>.
Changing Image Playback Settings
3 Adjusting the LCD Monitor Brightness
3 Setting the Image Review Time
To check the image’s exposure, you should look at the histogram (p.134).
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
COP
Y