Canon mp495 - Manual (Page 744)

Advanced Guide > About Network Communication > Troubleshooting > Cannot Print or Scan from a Computer Connected
to the Network
N045
Cannot Print or Scan from a Computer Connected to the
Network
Check 1: Make sure that the network settings of the computer are
correct.
For the procedures to set up the computer, refer to the manual of your computer or contact its
manufacturer.
Check 2: If the MP Drivers is not installed, install the MP Drivers.
Insert the Setup CD-ROM into the computer's disc drive and perform Custom Install and select MP
Drivers to install again.
Check 3: Make sure that access control is not set to the access point.
For the procedures to connect an access point and set it up, refer to the manual of your access point
or contact its manufacturer.
Note
To check the MAC address or the IP address of the computer, see Checking the IP Address or
the MAC Address of the Computer .
Page top
Page 744 of 759 pages Cannot Print or Scan from a Computer Connected to the Network