Bissell 30Z8e - Manual (Page 7)

Power button
Turn the power ON or OFF by pressing
lightly downward on the power button
( ).
Variable suction power control
The variable suction power control is
located on the back of the vacuum.
Turn the control toward the larger dots
for maximum suction. Turn the control
toward the smaller dots to minimize
suction for lightly soiled areas or
delicate fabrics.
Air flow regulator
Open the air flow regulator by sliding the
regulator back towards the handle to an
open position. This will reduce the suction
power for vacuuming delicate fabrics.
For full suction power, close the air
flow regulator by sliding the regulator
forward to the closed position.
w w w . b i s s e l l . c o m
7
O
perations
CAUTION:
Before using your vacuum,
make sure that the dirt
container and all filters
(pre-motor and post-motor)
are in place. Do not operate
your vacuum without the dirt
container and filters.
Variable Suction
Control
Power
Button
Tip:
Use the variable
suction power
control and the
air flow regulator
to reduce air flow
as needed when
using the tools.
Air Flow
Regulator